• For application to bare wood. Clean knots prior to priming/painting. To prevent discolouration of paint film. Use under oil-based and knotting-compatible water-based coatings.
• Suitable for Bare wood
• The surface must be clean, bare and sanded smooth. Clean off any excess resin using white spirit and allow to dry. A heat gun may be used (taking care not to char the wood) to draw-out excess resin, then scrape away. If there are cracks or holes around the knot, fill with Rustins Woodfiller, allow to dry, and sand smooth prior to applying Knotting.
• Using a brush apply Knotting liberally over the knot and surrounding area. Apply 2 coats. Do not sand after application knotting. Allow 1 hour between coats. Allow 1 hr after final coat before applying primer.
• Guarantee - Statutory

Features and benefits

Rustin’s Knotting contains pure shellac it is naturally brown in colour. White Knotting is also available which is made with bleached shellac.

• Apply to bare wood
• For Sealing knots
• Prevents bleeding through paint film & prevents discolouration of paints
• Fast drying
• For interior and exterior use

Specifications